Cycling Accessories

New Sheriff hubs are the ultimate in track racing hubs. They minimize weight with larger cutouts in the flanges, lightened axles, shorter bolts, and slimmer end caps than previous versions. The result is a hubset that weighs a mere 432g, 198g for the front, and 234g for the rear. This makes it one of the lightest track hubsets in the world, a figure even more impressive when you consider that All-City didn't eliminate the usefulness of a fixed / fixed or fixed / free option as most racing hubs do. They feature the finest Japanese manufactured 6902 bearings which roll incredibly fast and smooth while retaining excellent seals for all weather, all-day everyday durability. Front hub specs: - Weight: 198g - Torque Spec: 33nm (25ft lbs.) - Non-Drive Side Center to Flange: 34mm - Drive Side Center to Flange: 34mm - Non-Drive Side Flange Diameter: 62mm - Drive Side Flange Diameter: 62mm Rear hub specs: - Weight: 234g - Torque Spec: 33nm (25ft.lbs.) - Non-Drive Side Center to Flange: 29mm - Drive Side Center to Flange: 29mm - Non-Drive Side Flange Diameter: 62mm - Drive Side Flange Diameter: 62mm

The 612 Track Crank is an extremely stiff and strong 144mm BCD track crank. It’s at home as much on the busy avenues of your city as it is on the boards of the velodrome. All-City sweats the details, so the 612 (Minneapolis’ area code) is cold-forged, resulting in a tight grain structure. The upshot is that it’s strong, which means more riding and less worries for you. It utilizes the classic JIS square taper spindle and comes with a color-matched, 46-tooth, 1/8th chainring.  - Recommended Spindle Length: 110mm - Spindle Interface Type: square taper JIS - Bolt Pattern: 5-bolt - BCD: 144mm - Chain Compatibility: 1/2-inch x 1/8-inch - Weight: 726g w/ ring and bolts - Bottom bracket and retaining bolts not included

The beautiful Big Block track fork is now available in 1-inch and 1-1/8-inch sizes. Lugged crown, matching tips, straight blades, and looks that will make your heart melt. It’s the perfect replacement fork for nearly any track bike. - Material: Full 4130 High Quality Chromoly tapered fork blades, lugged crown, and matching dropouts - Axle to Crown Measurement: 375mm - Offset: 32mm - Steerer Tube Length: 300mm - Spacing: 100mm - Tire Clearance: 32c - Brakes: Mid Reach

Designed to store the essentials to repair a mid-ride mechanical, our Expedition Tool Pack is a sleek, ultra-compact pack that’s excellent for short rides and bikepacking adventures. Fitting neatly under the saddle, the tool bag attaches securely to the bike with a Velcro-backed Hypalon strap that’s effective even when exposed to road spray and grit – a weakness of traditional zippers and buckles. Inside, there’s enough capacity for two spare road tubes, tire levers, a small multi-tool, and a CO2 canister. The exterior of the tool bag is protected by a tough, lightweight fabric that’s completely waterproof. Reflective graphics and a light attachment point add visibility in low light. Features - Ultralight construction, weighing only 40g - Hypalon-reinforced Velcro strap gives a secure hold in all conditions - Wide opening, allowing easy access to contents when detached - Light attachment point and reflective graphics for increased visibility - Lightweight waterproof laminate, developed specifically for Apidura Materials - The tool bag is cut from a three-layer laminate fabric that was developed specifically for Apidura. The material is lightweight, and is highly resistant to tears and abrasion. Notably, it’s welded together at the seams, creating a watertight seal that ensures complete waterproofing. - The tool bag’s strap is reinforced with Hypalon, a rubberized nylon used to provide extra protection against friction and abrasion. Care - Wash the tool bag by hand, using a mild diluted soap if necessary. Afterwards, let it air dry. - Do not machine wash, machine dry, or iron.

Top Tube Tycoon is a storage bag for your adventurous side. Riding long days in remote places on a variety of terrain requires more preparation and more gear—additional layers, food, tools, phone, gloves, and let's not forget the occasional flask. The Tycoon steps to the throne with water-resistant, welded seam construction, streamlined form, and unmatched function for long days in the saddle. As some tend to say, it's all in the details. - Roomy 40 cubic inches of storage - Affixes with either straps or braze-ons - Sleek, tapered shape with sonic-welded seams - One-handed zipper operation - Bright orange interior lining so you can see your stuff inside - Padded plastic insert to keep bag shape, and eliminate rattle

Pump less, ride more! For use with home or shop compressors, this hand-held inflator is compatible with Presta valves and comes complete with a Woodsman pump head. By use of a clever valve plunger within the Woodsman head, the gauge shows actual tire pressure rather than air hose pressure.

Pump less, ride more! A bookend complement to our Presta Shop Inflator, this one is fitted with a clip-on Schrader head. The gauge reads actual tire pressure rather than air hose pressure due to integrated check valve design. Complete with a 2" diaphragm-type gauge for durability, with PSI and BAR graduations. A type 15 industrial interchange male fitting is already installed so it's ready to go, right out of the box.

Avid's Front 170mm Post Bracket Hardware Kit has everything you need to mount a 170mm rotor (sold separately) to the front of your bike. Kits include mounting bolts and post mount spacers for front brake installation.

Take your pet along with you in Axiom's Dual-Function Premium Pet Basket. Thanks to a host of pet friendly features like the antimicrobial floor liner, tether leash and handlebar safety straps, your pooch will love going for bike rides! The optional "Jump Stop" top cage (included) ensures your pal's safety and for convenience this pet porter can be mounted on either your handlebars or rear rack. - Reinforced, vinyl-dipped steel - Quick-release spring-loaded universal rack attachment (for mounting to racks). Heavy-duty quick-release handlebar bracket (fits 25.4-31.8 mm handlebars). - Spring-loaded top cage automatically stores away when not needed. - Padded carry handle. - Anti-microbial padded floor liner for comfort and sure footing. - Secondary handlebar safety straps offer additional security. - Adjustable tether leash included.

- Double-butted 7050 T6 Aluminum - Clamp size: 31.8mm - Anodized colors - Marked for a custom cut length - Weight: +/- 350g - Width: 780mm with 1" rise - Upsweep: 5°, Backsweep: 7°

- CNC Machined 6061 T6 Aluminum - Laser-etched logos - 31.8mm bore diameters - 40mm extension - 38mm stack height - 15° rise - Weight: 196g

- Light and strong stem perfect for Enduro riding - CNC Machined 6061 T6 Aluminum - Laser-etched logos - 31.8mm bore diameters - 50 & 60mm extension - 40mm stack height - 5° angle - Weight: 113g

A neoprene pogie designed to work with drop handlebars fitted with integrated shift/brake levers with externally routed shift cables and housing. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands - Opening measures 8.5" across

With more all-around coverage, the Sidetrack II is suited for the adventurous grom in your life. This all-mountain helmet offers a removable visor, an easy adjustable fit system, our sweat guide padding, and ready-for-action style that will get your child motivated to hit the trail! - 14 vents - Integrated MIPS (Multi-directional Impact Protection System) - MIPS is designed to reduce rotational forces that can result from certain impacts. By integrating the MIPS slip plane into the fit system, we are able to reduce complexity and weight for a compact, better ventilated helmet that fits more closely to the head. - Construction: Fusion in-mold polycarbonate shell - a process pioneered by Bell bonds the helmet's outer shell to the EPS foam liner to create a sturdier helmet. - Fit System: Ergo fit - sleek, easy-to-use dial system for one-handed adjustments (integrated with MIPS layer) - Retention System: No-twist tri-glides: quick-adjust fasteners that help keep straps flat and properly positioned - Interior: Sweat guide pad design pulls moisture away from the brow pad and away from eyewear

With more all-around coverage and MIPS protection, the Sidetrack II is suited for the adventurous grom in your life. This all-mountain helmet offers a removable visor, an easy adjustable fit system, our sweat guide padding, and ready-for-action style that will get your child motivated to hit the trail! - 14 vents - Integrated MIPS (Multi-directional Impact Protection System) - MIPS is designed to reduce rotational forces that can result from certain impacts. By integrating the MIPS slip plane into the fit system, we are able to reduce complexity and weight for a compact, better ventilated helmet that fits more closely to the head. - Construction: Fusion in-mold polycarbonate shell - a process pioneered by Bell bonds the helmet's outer shell to the EPS foam liner to create a sturdier helmet. - Fit System: Ergo fit - sleek, easy-to-use dial system for one-handed adjustments (integrated with MIPS layer) - Retention System: No-twist tri-glides: quick-adjust fasteners that help keep straps flat and properly positioned - Interior: Sweat guide pad design pulls moisture away from the brow pad and away from eyewear

Triggy Alpha - The name speaks for itself - the new pack leader of dropper remotes. Since the beginning our Triggy has proven to be a favourite among many many pro riders and testers but with Triggy Alpha we have now set the bar even higher and we confidently say: There is no better remote on the market. The video is pretty much explaining very well what makes Triggy Alpha stand out amongst others: - Ball bearing on the paddle - Angle-adjustable paddle - Black anodized aluminum body and paddle with laser engraved finish - 2 available paddle lengths for crisp or soft dropper engagement - 2 mounting holes - Integrated cable tensioner - Direct mount for almost any brake available (see mounting options) - New cable clamping for universal dropper compatibility - Extremely low weight: 32g/34g (short/long) - Maximum cable pull: 11 mm The short version mimics our proven original Triggy paddle geometry. The long variant features a 7mm longer paddle and reduces the required forces by about 15%. Triggy Alpha is compatible with any commonly available aftermarket cable-actuated dropper post on the market. 1 set Triggy Alpha includes: - 1x Triggy Alpha remote (short or long) - 1x shift cable - 1x wire endcap - 1x BikeYoke Splits Clamp or I-Spec Adapter (optional)

Blackburn's axle conversion kits make your thru axle bike compatible with most trainers and many trailer hitches on the market. The adapter kit is designed to turn your 12mm x 135mm, 142mm, or 148mm thru-axle bike into a trainer-ready machine or a trailer-pulling family explorer. Choosing the correct axle is simple. First, research which axle spacing your bike utilizes (135, 142, or 148mm). Next, choose the correct thread pitch by either comparing your thread spacing to Blackburn's thread scale on the packaging or by matching to one of the brands listed below: - RockShox Maxle - 1.75mm thread pitch - Syntace X-12 - 1.0mm thread pitch - DT x-12 - 1.0mm thread pitch - Shimano E-Thru - 1.5mm thread pitch - DT E-Thru - 1.5mm thread pitch

The Grid 2'fer is a set of high-powered front and rear light. A quick double-click of the power button switches it from white to red. With four mode options, you can choose if you need high lumen power or extended run time. Ready for those commuting in the city, riding the open roads, or heading to their local trail. Grid 2'fer offers the right light, front or rear, with plenty of rechargeable power to keep you visible any time of day. - COB LEDS - Pack more LEDs in a small package with a powerfully even and wide light array to help you to be seen while riding in any environment. - ECO MODE - Extremely long run time in our Eco Mode for those riding all week, or on long daily rides. Eco Mode also extends the Pulse and Strobe modes by two hours. - USB-C-Modern USB plug standard to ensure you can stay charged and ready to ride - BATTERY GAUGE - Small color LEDs in the power button help you monitor your light battery power, to tel you when it's time to charge your light once more. Green = 100-50%, Orange = 50-25%, Red = 25-0% - MEETS ANSI FL-1 STANDARD - This standard was created by the American National Standards Institute (ANSI) to provide consistent performance measurements for handheld lights. - IP-65-Ingress protection rating or 'IP rating', is a techy way to describe the level of water and dust proofness a product has. This light meets the IP-65 standard, which means is totally protected against dust/grit and is fully resist strong jets of water from all directions. - LIMITED LIFETIME WARRANTY - Restrictions and conditions apply.

Take the lane with the confidence you're using the strongest tail light Blackburn's ever made. Featuring 3 focused LEDs, 270 degrees of visibility, and the 125-lumen BLITZ daytime running mode, the DAYBLAZER has all of your ride needs covered. Also, because of the narrow profile of the light and its unique mounting bracket, the DAYBLAZER 125 tail light can be mounted to just about anything you can think of from round or aero seatposts, to seat stays, to a rear rack, or your back pack. - Charging cable included, no tools required - Lithium-ion battery - Waterproof to IP-67 standard - TIR Lens - LED Fuel Gauge/Charge Indicator - Aluminum Construction - 3 hour recharge time - Runtime Solid: High 1.6hrs (120 lumen), Low 3 hrs (50 lumen) - Runtime Flash/Strobe: 3hrs (125 lumen)/6 hrs (65 lumen) - 78g

The Grid Side Light Set is designed to be mounted to either side of your fork and is spec'd with eye-catching amber-colored LEDs. Supported by a study by the National Highway Traffic Safety Administration (NHTSA) that showed 27% of bicycle accidents are side impacts and 30% of fatalities occur in intersections (between 2010-2017). Being seen from all angles while cycling has never been easier with this weather-proof, rechargeable Grid Side Light Set. - COB LEDS - Pack more LEDs in a small package with a powerfully even and wide light array to help you to be seen while riding in any environment. - ECO MODE - Extremely long run time in our Eco Mode for those riding all week, or on long daily rides. Eco Mode also extends the Pulse and Strobe modes by two hours. - USB-C - Modern USB plug standard to ensure you can stay charged and ready to ride - BATTERY GAUGE - Small color LEDs in the power button help you monitor your light battery power, to tell you when it's time to charge your light once more. Green = 100-50%, Orange = 50-25%, Red = 25-0% - MEETS ANSI FL-1 STANDARD - This standard was created by the American National Standards Institute (ANSI) to provide consistent performance measurements for handheld lights. - IP-65 - Ingress protection rating or 'IP rating', is a techy way to describe the level of water and dust proofness a product has. This light meets the IP-65 standard, which means is totally protected against dust/grit and is fully resist strong jets of water from all directions. - LIMITED LIFETIME WARRANTY - Restrictions and conditions apply.

A perfect expandable bag to fit smaller frames for a week long adventure or an all day pleasure ride. Organization We carefully consider what is put in each of our bags and tailor the compartments, pockets and other features to make sure there is a perfect place for everything. Expandable - Sometimes you need more space, while other times you need less. This bag expands to accommodate both. Hose Port - The outpost elite frame bags feature a hose port to allow for the storage of a water reservoir and/or a cache battery to get dense heavy products to the lowest center of gravity. Water Resistant - Coated 70d ripstop nylon and polyurethane zippers provide extra protection against the elements. - Capacity: 2L/3.5L Expanded - Dimensions: 342.9 x 139.7mm/228.6mm Expanded - Water resistant - Extra protection against the elements

Easy access to your essentials like ride food, sunscreen, or your smart phone/camera can make or break a ride. Blackburn has redesigned their Outpost Top Tube Bag to fit more bikes, better. Now featuring longer, removable straps and optional 63mm-spaced, M5 bolt holes, the Outpost TT Bag will fit any bike for any ride. - Spacious interior with adjustable organizer - Exterior mesh pocket for phone or camera - Zippered I.D. and cash pocket - Top tube straps adjust to mount quickly on almost any bike - 70D Nylon, 4mm ripstop with water resistant treatment and backing

Inexpensive Doesn't Mean Cheap. The Core 2 pump still shares all the techy bits of its big siblings but is built for folks operating on a smaller budget. The AirTap head will function with Schrader/Presta/Dunlop valves and has an integrated bleed valve for dialing in your pressure. Our aviation-style gauge is 2.5 inches wide, and easy to read. It's also built into the base to add to the stability of the Core 2 during use. Whether you are in the basement, the garage or at the trail head, the Core 2 has you covered. - Dimensions: 4.25 x 9 x 24 inches Airtap Core Pump Head - Our AirTap reversable pump head works with Schrader, Presta or Dunlop valves and features an integrated air bleed button right at the valve for perfect pressure, every time. Aviation Guage - The 2.5-inch-wide base-mounted gauge lets you easily read your tire pressure, and adds to the footprint of the Core 2 pump's solid stance. Air Bleed - Button on the pump head to micro-adjust pressure.

Offering 16 liters of carrying capacity, the Local Grocery pannier neatly folds out of the way when not in use and is compatible with most rear racks. - Fits Most Rear Racks—The straightforward mounting hardware makes mounting the local grocery basket fast and simple to most rack designs. - Light Mount—This bag features an integrated rear light mount to help keep you extra visible while you are running errands. - Folds Flat—The Local Grocery Bag folds flat to stay out of your way when it is not in use. - Water Resistant Design—You know what's better than a soggy carton of eggs? Yep, one that's not soggy—and with water resistance, nothing has to be soggy. - Reflective Print—For better nighttime visibility and safety. - Lifetime warranty

The Local Rear Pannier can mount to a rack or be carried over your shoulder for shopping trips or commutes and is a great carry-all bag for work, school, shopping, or anywhere your bicycle takes you. The newly redesigned Local Pannier features an easy to use, robust mounting system and has hits of retro reflective print to keep you visible when the sun goes down. - Fits Most Rear Racks—The straightforward mounting hardware makes mounting the local grocery basket fast and simple to most rack designs. - Light Mount—This bag features an integrated rear light mount to help keep you extra visible while you are running errands. - Water Resistant Design—You know what's better than a soggy carton of eggs? Yep, one that's not soggy—and with water resistance, nothing has to be soggy. - Reflective Print—For better nighttime visibility and safety. - Lifetime warranty

Ride essentials. Going for a ride but don’t know what to pack? No problem; we’ve got you covered. The local ride kit offers up what you need to get home; and extra carrying capacity to bring along anything else. With a seatbag, mini pump, mini tool and tire levers, this little kit, bundled in a compact package, has all the tools you need to get out there and keep going. - Blackburn's Local Seat Bag (Medium) offers extra space to pack your tube, wallet, phone, or whatever you want - Blackburn Heist 6 Multi Tool provides a quality tool to make sure your bike is adjusted properly for your ride - Blackburn's Mountain AnyValve Mini-Pump comes equipped with their popular and proven AnyValve head, which works on Presta, Schrader, and Dunlop valves. - 2x tire levers

Meet your new best friend: The Local Trunk bag. This do-it-all workhorse of the Local line can transform to carry just about anything you can think about picking up from a sixer, to a stack of comic books, to some fresh fruit from the farmers market. - Fits Most Rear Racks—The straightforward mounting hardware makes mounting the Local Trunk Bag fast and simple to most rack designs. - Light Mount—This bag features an integrated rear light mount to help keep you extra visible while you are running errands. - Drop-Down Side Pockets—Sometimes you need more space, while other times you need less. This bag expands to accommodate both. - Water Resistant Design—You know what's better than a soggy carton of eggs? Yep, one that's not soggy—and with water resistance, nothing has to be soggy. - Reflective Print—For better nighttime visibility and safety. - Lifetime warranty

A perfect expandable bag to fit medium frames for a week long adventure or an all-day pleasure ride. Organization We carefully consider what is put in each of our bags and tailor the compartments, pockets, and other features to make sure there is a perfect place for everything. Expandable - Sometimes you need more space, while other times you need less. This bag expands to accommodate both. Hose Port - The outpost elite frame bags feature a hose port to allow for the storage of a water reservoir and/or a cache battery to get dense heavy products to the lowest center of gravity. Water Resistant - Coated 70d ripstop nylon and polyurethane zippers provide extra protection against the elements. - Weight: 14.4oz - Capacity: 4.3L/5.8L Expanded - Dimensions: 457.2 x 177.8mm/279.4mm Expanded - Water resistant - Extra protection against the elements

Want to hit the local trail for a midnight shred, or commute home on a November evening? The sleek and tiny Dayblazer 1000 has you covered. MEET THE NEW CHAMP! This little devil packs a 1000-lumen punch onto a tiny bar perch. Weighing in at just 140 grams, this light hits way above its weight class. Gone are the days of a 10-watt halogen bulb and a bulky water-bottle-shaped, lead acid battery pack. Now we've got it all wound up in a tiny bar-mounted front light! Want to hit the local trail for a midnight shred, or commute home on a November evening? The sleek and tiny Dayblazer 1000 has you covered. Featuring our eye-popping BLITZ Daytime Running Mode to grab the attention of cars, an action-style camera mount, ample side visibility and IP-67 submersibility, the Dayblazer 1000 is your new best riding buddy. - Recharge Type: Micro-USB rechargeable — Charges via any standard USB port (charging cable included) - Brightness: Up to 1,000 lumens - Country of Origin: China - Recharge Time: 5-hour recharge - Mounting Options: Universal Mount - Action-camera-style mount fits most helmets and handlebars 22–35mm in diameter - Weight: 140 grams Run Time : - Blitz mode: 1.5 hours at 1,000 lumens - High mode: 3 hours at 500 lumens - Low mode: 5.5 hours and 350 lumens - Pulse mode: 6.5 hours at 210 lumens - Strobe mode: 15 hours at 100 lumens Water Resistance: - IP-67 submersible - Ingress protection rating, or "IP Rating," is a techy way to describe the level of water- and dust-proofness of a product. This light meets the IP-67 Standard, which means it is totally protected against dust/grit and fully protected against the effects of immersion between 15cm and 1 meter for 30 minutes.

Blazing on a budget is how we should describe this light set. Featuring the Dayblazer 550 front light and the Dayblazer 65 rear light, this combo will get you noticed without breaking the bank. THE PERFECT COMMUTER LIGHT SET. Get noticed without breaking the bank. Both lights are spec'd with eye-catching BLITZ Daytime Running Mode and a multitude of mounting options. Perfect for city riding. - Recharge Type: Micro-USB rechargeable — Charges via any standard USB port (charging cable included) - Brightness: Up to 550 lumens front, 65 lumens rear - Country of Origin: China - Recharge Time: 3-hour recharge (front)/2-hour recharge (rear) - Mounting Options: Universal Mount - Action-camera-style mount fits most helmets and handlebars 22–35mm in diameter (front)/Versatile mounting system (rear) - Weight: 177 grams (front 129g, rear 48g) Run Time : - Blitz mode (front): 1 hour at 550 lumens - High mode (front): 1.5 hours at 275 lumens - Low mode (front): 5 hours at 75 lumens - Pulse mode (front): 5.5 hours at 100 lumens - Strobe mode (front): 12 hours at 65 lumens - Solid mode (rear): 1 hour at 50 lumens - High flash/Strobe mode (rear): 3 hours at 65 lumens - Low flash/Strobe mode (rear): 6 hours at 35 lumens - Group Ride mode (rear): 20-25 hours at 3 lumens Water Resistance: - IP-67 submersible - Ingress protection rating, or "IP Rating," is a techy way to describe the level of water- and dust-proofness of a product. This light meets the IP-67 Standard, which means it is totally protected against dust/grit and fully protected against the effects of immersion between 15cm and 1 meter for 30 minutes.