Brakes/Levers/Pads

Disc Brake Adapters

- Replacement barrel adjuster for FR5 and SD7 levers - Includes one pair

Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.

The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone

Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.

Bolt on Avid's Rim Wrangler 2 Brake Pads for excellent stopping power. The cartridge design makes it easy to switch pads when they wear out. They're designed for use with linear-pull brakes.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Slip Avid's Shorty Brake Pad Inserts into your Shorty cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.

Built around one of our original breakthrough designs, the Speed Dial 7 is the smooth and powerful way to control linear-pull or mechanical disc brakes. They are super easy to install and adjust so you can dial in the modulation just the way you like. - Compatible with mechanical disc brakes and linear-pull brakes. - Reach Adjust and Speed Dial Leverage Adjust - Reversible

The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Avid's Front 170mm Post Bracket Hardware Kit has everything you need to mount a 170mm rotor (sold separately) to the front of your bike. Kits include mounting bolts and post mount spacers for front brake installation.

Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

Avid's Rear 170mm Post Bracket Hardware Kit has everything you need to mount a 170mm rotor (sold separately) to the back of your bike. Kits include mounting bolts and a 30mm post mount spacer for rear brake installation.

Bolt on Avid's Shorty Brake Pads for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.

Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.

Clean up your control center with Avid's Matchmaker clamp. It combines the mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can drop some grams and keep your bar nice and tidy.

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.

Cost effective stopping power from the leader in cable-actuated disc brakes. - For use with short cable-pull levers - Mono-block caliper design has outboard pad adjustment - Spring tension is adjustable - Caliper has 74mm mounting bolt spacing; mounting adaptors are sold separately - Brake Caliper Type: Post Mount - Brake Lever Actuation: Short Pull - Rotor Included: No - Weight: 215 g

Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.

For the ultimate light-weight brake setup, Avid ditched the concentric caliper-centering washers and gave you titanium bolts to save precious grams. This kit includes ultra-light titanium hardware for standard (direct-mount) mounting.

Perfect for your road, touring or cross bike, Avid's BB5 Road brakes have all the power you need. Used with your road-style levers, they sport precision actuation as well as tool-free pad replacement. Plus, Avid's ingenious Tri-Align caliper-positioning system perfectly aligns the pads parallel to the rotor in seconds for powerful braking with positive modulation in any condition.

Bolt on Avid's Shorty Ultimate Brake Pads for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote for maximum convenience and ease of use.

Avid's BB7 is the mechanical-disc brake that raises the bar. It boasts dual pad-adjustment knobs and Avid's ingenious Tri-Align caliper-positioning system so you can dial in perfect braking in seconds. The BB7 also utilizes precision actuation and variable spring tension to give you serious stopping power and out-of-this-world modulation. And, this setup comes with Avid's CleanSweep rotor for consistent, powerful braking and tool-free pad replacement for easy maintenance.

Perfect for your road, touring and cross bike, Avid's BB7 Road brakes have all the power you need. Used with your road-style levers, they provide precision actuation as well as tool-free pad replacement. Plus, Avid's ingenious Tri-Align caliper-positioning system perfectly aligns the pads parallel to the rotor in seconds for powerful braking with positive modulation in any condition.

Sleek, stylish, and powerful, Avid's BB7 S Mechanical Disc Brake is right at home on any disc-brake compatible road or 'cross bike. Used with your road-style, drop bar levers, it provides precision actuation as well as tool-free pad wear adjustment and replacement. Avid's ingenious Tri-Align caliper-positioning system perfectly aligns the pads parallel to the rotor in seconds for powerful braking with positive modulation in all conditions. It also includes an HS1 rotor for solid stopping power.

Disc brake power, rim brake weights — at 170-grams per caliper Avid's BB7 Road SL brakes pack a punch in a flyweight package. Used with your road-style, drop bar levers, they provide precision actuation as well as tool-free pad wear adjustment and replacement. Avid's ingenious Tri-Align caliper-positioning system perfectly aligns the pads parallel to the rotor in seconds for powerful braking with positive modulation in any condition. Plus titanium mounting and rotor bolts shave even more grams on this great disc setup.

DESCRIPTION The Box Three Brake is available in 85mm with short reach lever or 108mm with long reach lever. They include two-tone, dual-compound pads that feature a unique finned design that helps improve airflow. The Philips head tension screws aid installation and makes toe-in adjustments simple and easy. FEATURES - Cold Forged from 6061-T6 Aluminum - Up to 35mm of brake pad adjustment - Box Three™ Air Flow Brake Shoes w/ Dual Compound Pads - Brass bushings, Stainless Steel Hardware - Phillips head tension screw - 5mn allen key to secure cable on right arm

While the other components of the drivetrain take care of acceleration, the Centaur groupset also offers fantastic control thanks to newly designed brakes weighing around 50 grams less than competitors’ equivalent models. For the cyclist this is a major plus, as they know they can count on the extreme control offered by such powerful and adjustable brakes. Push harder and go faster, Centaur brakes will be your faithful ally as you power to victory. - Dual pivot front and rear brakes. - Forged solid aluminum brake arms provide increased stiffness. - Includes special compound brake pads for optimal braking on both wet and dry surfaces. - Adjustable pad holders allow for micro adjustment - Brake Mount Type: Short Reach Caliper (39mm - 49mm) - Brake Position: Set - Brake Lever Actuation: Short Pull - Pad Type: Cartridge - Weight: 325 grams

The Campagnolo 03 rotors were designed to ensure optimal resistance to overheating, thus guaranteeing greater braking capability even in the most critical situations. - Designed to be used with Center Lock or AFS systems - Feature a rounded UCI compliant edge for safety and easy insertion into calipers

Campagnolo strives to always offer the best solutions, no matter what frame or tire the cyclist has chosen. As manufacturers begin to develop frames and fork designs that take advantage of the aerodynamic gains of direct mount brakes, the Campy Tech Lab has worked to make new Campagnolo Direct Mount brakes that can guarantee the Campagnolo quality and performance standards. Through the self-balancing design, this new braking system by Campagnolo provides a completely symmetric and efficient brake application. In addition, the extremely stiff structure of the new Campagnolo Direct Mount brakes ensures superior stopping power, whilst the design elements take inspiration from the aerodynamics of the brake and are enhanced by the new sealed structure of the brake levers themselves. In addition to pure performance, a great deal of attention was given to ease of use and adjustment. The goal was to guarantee that the Campagnolo brake would be both easier to fit and intuitive and simple to adjust compared to any model available. That was made possible through the stiff structure positioned in the rear part of the brake, enabling rapid fitting that does not require external brake boosters, even on the weakest chainstays.

The Campagnolo EKAR Ergopower Shift/Brake Levers and Disc calipers were designed with gravel riding in mind. Easy, intuitive shifting mechanisms, and comfortable levers make this 1x13-speed system a desirable option for gravel riders. - Precise, quick shifting with One-Lever-One-Action and positive engagement with the efficient 1x13-speed Ekar drivetrain means a perfect change every time - Lever 3 has been redesigned so that it is easy to activate from the drops - Ultra-Shift mechanism allows you to up-shift 3 gears with one action - Vari-Cushion hoods provides comfortable, safe grip in any riding position and any off-road conditions - Additional laser-cut texture on lever blades and controls is sweat- and wear-resistant for an enhanced grip - Ergonomic adjustable reach to suit any hand or finger size Specifications: - Pad Compound: Organic - Brake Caliper Mount: Flat Mount - Hydraulic Fluid Type: Mineral Oil - Rear Der/Shifter Compatibility: Campy EKAR - Adjustable Reach: Yes - Drivetrain Speeds: 13

Record 12-Speed controls are aesthetically pleasing and functional. The unidirectional carbon design offers riders two different lever-handlebar positions to adapt different size hands, maximizing control. This results in consistent power, stiffness and reliability for when you need it. - Hydraulic disc brake actuation - Vari-Cushion technology offers an ergonomic, comfortable and safe support and grip - The “one lever-one action” feature assigns each lever one function to prevent shifting errors - Ultra-Shift mechanism enables upshifting up to three gears at a time, and downshifting a full five - Disc rotor sold separately Specifications: - Pad Compound: Semi-Metallic - Brake Caliper Mount: Flat Mount - Brake Lever Use: Right - Hydraulic Fluid Type: Mineral Oil - Rear Der/Shifter Compatibility: Campy 12-Speed Chorus/Record/Super Record 2019+ - Drivetrain Speeds: 12 - Adjustable Reach: Yes

The Campagnolo Super Record EPS Ergopower shift lever features effective ergonomics and the best of Campagnolo's shifting and braking technology. - Campagnolo's Multishifting technology allows you to change several sprockets on the 12-speed cassette with a single shift - When the chain engages immediately, the derailleurs can be actioned with minimum effort and in any position on the handlebars, allowing for quick shifting - The controls offer a stable and safe grip when standing pedaling or when leaning high on the handlebars - Shaped cushioning and an adjustable reach make these controls perfect for any cyclist, regardless of hand or finger size - The flat-mount Campagnolo brake caliper ensures powerful, modular braking in any situation owing to pistons measuring 22mm in diameter - Brake pad return guaranteed by the magnetic system ensures that there is no friction at the time of brake lever release - A special metal plate positioned between the pad and the caliper piston, cushions the vibrations during braking Specifications: - Pad Compound: Semi-Metallic - Brake Caliper Mount: Flat Mount - Brake Lever Use: Right - Hydraulic Fluid Type: Mineral Oil - Front Der/Shifter Compatibility: Campy Record/Super Record EPS - Rear Der/Shifter Compatibility: Campy Record/Super Record EPS - Drivetrain Speeds: 12 - Adjustable Reach: Yes

Simple, economical threadless post mount caliper brake pads. - Rubber compound improves performance over many OE pads

• Replacement hoods for road brake levers with traditional, non-aero cable routing • Soft, tacky rubber for a sure grip • Available in black or brown

• Replacement hoods for Cane Creek SCR5 brake levers • Soft, tacky rubber for a sure grip • Available in black or gum

Add another braking option to your road or cross bars with Cane Creek's Cross Top Brake Levers. They are a great way to gain more control on technical cyclocross courses by enabling braking from the tops of the bars.

The eeBrake G4 is the fourth generation eeBrake featuring 100% CNC machined parts and a wider design optimized for 22-28mm rims. It features a stiffer black arch spring, a revised one-piece center adjuster with built-in resistance for easier use, and ghosted laser etching that will stand the test of time. All with the same stopping power and light weight that you've come to rely on from eeBrakes. - The eeBrake cable adjuster pivots as the brake is applied, optimizing cable alignment during brake actuation - The cross cable path aligns the brake cable over the center of the brake which provides a clean and aerodynamic line, moving the cables into the "wind shadow" of the frame - Tool-free caliper centering adjustability provides super-precision and pad motion consistency - One simple flip of the lever on the Quick Strut release opens wide enough to easily clear a 31mm tire, allowing for easy wheel removal - Optimized to work with Shimano, Campagnolo, and SRAM levers

- One-piece all weather pad - Threaded posts

ENVE replacement brake pads for full-carbon ENVE rims and wheelsets with a smooth surface brake track. Our brake pads are specifically formulated and optimized for best performance with our molded-in texture brake tracks found on the Smart ENVE System (SES) wheels. - Only for use with the updated brake track found on ENVE SES 2.2, SES 7.8, and most recent versions of SES 3.4, and SES 4.5 wheels.

These replacement brake pads are designed specifically for full-carbon ENVE rims and wheelsets with a smooth surface brake track. Carbon fiber rim construction and design are only part of the solution to solving the heat equation. Brake pads play an integral role in ride performance and long-term durability of the wheel.

- Forged alloy pad construction - Heat reducing finned design - Pad runs cooler increasing power - Organic Semi metallic material - 24.8g

- All-weather compound - Threaded posts - Hardware included - Pair

- High-performance Giga Power compound - Threaded posts - Hardware included

- 55mm Shimano compatible road brake pads - Dura-Ace and Ultegra compatible

- 410 Stainless steel construction - (6) Black M5 mounting bolts - Weights: 68g (140mm) / 85g (160mm) / 112g (180mm)

- Two-piece rotor design with forged aluminum carrier - Double disc ground stainless steel rub ring - Countersunk rivets and disc screw mount points - Rounded edge shape - Mount Type: 6-Bolt

- Hayes service parts for calipers - Rebuild kits include: (2) caliper pistons with square profile seals, transfer port o-ring, and caliper bleeder with cap

Externally fitting service parts for Hayes hydraulic disc brake master cylinder

- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts

Replacement levers pivots pin kit for Hayes hydraulic disc levers

- Prevents pads from becoming dislodged from pistons when transported without rotor inserted in caliper - Sold (10) per bag

Hose fittings for Hayes hydraulic disc brakes

For use with 2000+ Hayes 74mm eye-to-eye calipers (adapters/calipers for 22mm mounts are no longer available) - (IS) International Standard 51mm tabs; (QR) Quick Release; (TA) thru-axle - Note: Fox-36/40 (thru-axle), Rock Shox Pike (Maxle), and Psylo (Tullio) axle forks use IS-QR adapters

- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip

- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts