Cycling Accessories

Warmth Without Weight Mother Nature has met her match with this low-profile glove engineered to keep you going fast in cold, wet weather. Laminated insulated shell with waterproof breathable insert blocks out the water and keeps them dry while maintaining exceptional dexterity and control of your bike. - Single-layer PU palm for weather protection - Lightly insulated soft-shell top hand ensures protection against colder temps - Waterproof-breathable insert secured to outer layer for optimal gripping - Silicone-printed palm graphic increases grip in wet conditions - Reflective graphic on top of hand offer a clean look with improved visibility - Embossed graphics for some added texture - Extended waterproof neoprene pull-on cuff for more coverage - Conductive index finger & thumb keeps you connected with your digital device - 61% Polyester, 23% Nylon, 12% Polyurethane, 4% Elastane

The Midweight sock won’t add bulk under the Naughtvind bibs yet are warm enough to keep the cold at bay. Our Knee High Sock is made with a Merino wool blend to wick moisture away from your feet, keeping them warm and dry. - 11-inch cuff - Wear them on their own on cold days, or layer them with the Lightweight Sock and add a vapor barrier for deep cold - Knee-high coverage eliminates gaps in layers

Secure your eBike battery to your bike using quality Abus lock cores.

The ABUS Diskus lock is a special kind of padlock with some distinct advantages. The disk shape itself effectively combats the most common ways of forcing it open, and the small opening in the shackle makes tampering with this lock very difficult. Because these disk locks are mainly made of stainless steel, they are especially suitable for applications in which both security and protection against corrosion are required. The 24IB is used to secure bikes, trucks, doors, gates, barns, cellars, sheds, etc. The locks can be retrofitted with an ABUS-Plus disk cylinder which provides the highest protection against picking methods. - Security Rating: 7/10 - Width: 2 1/64-inch

- 4 piece sleeve set for Adams Trail-A-Bikes - Includes new shim for oversized seatposts that fits 25.4mm to 35.0mm and beyond

- Chromoly steel with black oxide finish - 1.37" x 24tpi right hand thread - Requires a cog lockring (sold separately) - Compatible with 1/8-inch chains

Same size as Maybell, but heavier (darn brass)—71 grams. Really BIG sound due to the brass dome, adjustable ringer. It's not easy to gain the attention of other cyclists, runners and walkers without making noise, and bells beat yelling. There is actually an art to making a nice sound come out of something so small. Stainless steel thumbscrew so you can install or remove the bell with no tools; fits 31.8 with a shim to fit 28.6.

The Looney Bin is the place for those that just can't get along with the rest. Not every bottle is 73mm and not everyone wants to use a "regular" bottle while on their bike. The Looney Bin will hold anything from a convenience store bottle of H2O to a nice bottle of Pinot Noir. This is the perfect cage for a commuter rig or the Mixte for that spring picnic. Drink and ride responsibly… - Fits bottles 65-95mm

Pico, Medio and Gordo are our water, resistant extra durable range of Arundel seat bags. We make use of sonic welded seams and nylon fabric impregnated with thermoplastic polyurethane. Think frogman raft. The straps are also nylon and wider than usual, like seat belts in planes and cars. A wider strap means more Velcro area for better security. The materials we used cost more but in exchange, you have a seat bag that should last a good long time. All three are slightly roomier than our time proven corresponding sized Uno, Dual and Tubi. Medio - 33 cubic in, 5 X 3 3/4 X 2 in - Sonic welded seams - Wide 1 1/2 in nylon strap with extra Velcro - Fits an MTB tube or two 700c gravel tubes, plus gas, filler etc.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

- Includes stainless bolts - Fits 160mm front and 140mm rear rotors

The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Avid's Front 170mm Post Bracket Hardware Kit has everything you need to mount a 170mm rotor (sold separately) to the front of your bike. Kits include mounting bolts and post mount spacers for front brake installation.

- Includes stainless steel bolts - 40mm fits 200mm Front and 180mm Rear Rotors

Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.

- Chromo spindle - Loose ball bearings - Grippy, molded pins - Weight: only 322g/pair

- 6061-T6 forged Aluminum - 2-bolt clamp - High polished finish - Laser-etched logos - 350mm length - Weight: 290g

DESCRIPTION The Box Three Brake is available in 85mm with short reach lever or 108mm with long reach lever. They include two-tone, dual-compound pads that feature a unique finned design that helps improve airflow. The Philips head tension screws aid installation and makes toe-in adjustments simple and easy. FEATURES - Cold Forged from 6061-T6 Aluminum - Up to 35mm of brake pad adjustment - Box Three™ Air Flow Brake Shoes w/ Dual Compound Pads - Brass bushings, Stainless Steel Hardware - Phillips head tension screw - 5mn allen key to secure cable on right arm

- Made in the USA - Wide field of view with three pivot points for total adjustability - Lightweight and optically correct - Fits helmet visors and eyeglasses; will fit helmets with adapter

The first stainless-steel bottle with a flow-rate designed for cyclists. - Silicone anti-slip exterior on colored bottles - Single-wall non-insulated - Patent pending high-flow sport nozzle - LFGB compliant food-grade silicone components - 100% recyclable stainless steel - BPA/BPS/BPF and phthalates free components - Lid is interchangeable with Bivo Duo - 21 oz capacity / 158 g dry weight / 8.38" height

The first stainless-steel bottle with a flow-rate designed for cyclists. - Silicone anti-slip exterior on colored bottles - Single-wall non-insulated - Patent pending high-flow sport nozzle - LFGB compliant food-grade silicone components - 100% recyclable stainless steel - BPA/BPS/BPF and phthalates free components - Lid is interchangeable with Bivo One - 25 oz capacity / 175 g dry weight / 9.63'' height

Meet the Trio Mini, the newest member to the Bivo family. Built to fit in small bike geometry and to keep your H2O ice cold for hours! - Silicone anti-slip exterior - Double-wall vacuum insulation (12+ hrs of chill) - Patent pending high-flow sport nozzle - LFGB compliant food-grade silicone components - BPA/BPS/BPF and phthalates free components - 100% recyclable stainless steel - 17 oz capacity / 250 g dry weight / 8.66" height

The first insulated stainless-steel bottle with a flow-rate designed for cyclists. - Silicone anti-slip exterior on colored bottles - Double-wall vacuum insulation - Patent pending high-flow sport nozzle - LFGB compliant food-grade silicone components - BPA/BPS/BPF and phthalates free components - 100% recyclable stainless steel - 21 oz capacity / 276 g dry weight / 10.23" height

- Durable nylon+fiber body - Heat-treated chromoly spindle - Molded pins - Loose ball bearings - 375g/pair

Essential for your off-road adventures, this pump produces a hurricane-force air blast with its high-volume barrel. The oversized design, made from strong and lightweight aluminum, delivers more air per stroke so you can get back on the trail quickly. Details: - AnyValve pump head automatically adapts to Presta, Schrader, and Dunlop valves - Rebuildable internal parts available - Tough, lightweight aluminum barrel - Rubberized folding T-handle - Bike mount included - 90 PSI, 6.2 Bar maximum - 145g / 0.32lb

Just the basics. No more, no less. A tiny bag with big potential. Together with tough materials, an internal pocket and a built in light loop the Grid MTB is large enough to fit an MTB tube or a multi-tool, 2 tire levers and a CO2 inflator. - Padded structure keeps its shape - Coated zipper, tail light loop, internal pocket - 14oz/0.4L/24cu in. capacity - Welded seam construction - Hook and loop attachment - Weight: 31 grams

With a smart universal mounting system, the multi-mirror works with many different handlebars by wedging into the ends of your bars. - Our mirrors don't weigh much but offer you a ton of visibility - Easily mount these convenient mirrors directly on your handlebars - 4.8 oz - Lifetime warranty